-40%
TCS ~ New 2021 ~ KA1-C Keep Alive® Current Capacitor ~ HO & N ~ New Design ~1455

TCS ~ New 2021 ~ KA1-C Keep Alive® Current Capacitor ~ HO & N ~ New Design ~1455

$ 15.06

Availability: 38 in stock
  • Control: DCC
  • Refund will be given as: Money Back
  • Condition: New
  • Return shipping will be paid by: Seller
  • Brand: TCS
  • Modified Item: No
  • Item must be returned within: 30 Days
  • Recommended Age Range: 14
  • All returns accepted: Returns Accepted
  • MPN: 1455
  • Scale: HO Scale

    Description

    Iron Planet Hobbies
    TCS KA1-C ~ New Design
    TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.
    Newly-redesigned and coming in at half the size of a KA3, the KA1 will power HO or N scale locomotives with approximately one-third of the capacitance of KA3/KA4 devices (depending on the locomotive and motor).
    This Keep-Alive® includes a 2-Pin Quick Connector Harness for attaching the KA to the decoder.
    Dimensions:
    1.063" x 0.35" x 0.244" or 27mm x 8.9mm x 6.2mm
    Scale:
    HO Scale N Scale
    Input Rating:
    12 to 16V
    Keep Alive® Decoder Compatibility
    TCS Keep Alive® (KA) devices are designed to operate with all TCS (or any other Keep Alive® ready) decoders. Decoders with a “-KA” suffix include an extra Blue wire and a Black w/ White Stripe wire for hardwiring the KA to the decoder. Decoders with a “-KAC” suffix have a 2-Pin Connector for attaching the KA(x)-C.
    Not all DCC decoders are Keep Alive® ready. TCS decoders use software to enable and disable KeepAlive, so if your decoder does not support Keep Alive®, it may not work. Keep Alive® supported code for TCS decoders was implemented fully by November 2012. If the date code in your decoder is before this date, Keep Alive® may never enable. CV's 250, 251, and 252 read as the month, day, and year of manufacturing.
    If you would like to attach a Keep Alive® unit to a non-TCS decoder, you need to connect the wires across the output of the bridge rectifier on the decoder. You will need to consult your decoder manufacturer for a schematic or wiring diagram.
    Installation Notes for TCS Decoders
    1. ALL TCS decoders are compatible with Keep Alive® devices.
    2. Connect the Keep Alive® wires to the decoder (Make sure you match the wire colors on the KA to same wire color on the decoder).
    3. That’s it! Your locomotive is ready to run over the most treacherous of tracks.
    One Year Goof Proof Warranty
    All decoders are covered by a one year goof proof warranty. Please return in a small box.
    You MUST register the failed decoder on our website at tcsdcc.com/warranty
    Follow the instructions on the website before returning any decoders to TCS.
    We are an authorized TCS dealer.
    Thanks For Looking!