Right Weigh 202-DDG-03 Interior Digital Load Scale For Three HCV Air Suspension

Description

Sample Product
202-DDG-03 Interior Digital Load Scale
For Three Total Height Control Valves on Dedicated Tractor/Trailer Sets
Right Weigh's 202-DDG-03 interior digital load scale has 3 internal air sensors and is designed for monitoring three height control valves (HCV's). This can be a combination of a dual HCV tractor, with a single HCV trailer, a single HCV truck, and 2 single HCV trailers and so on. On the display, you can setup an Estimated Steer Axle, Drive, Trailer A, and Trailer B depending on your configuration - as long as your truck and trailers consist of a total of 3 height control valves.  After both an empty and loaded calibration has been performed at a certified ground scale for all axle groups attached, the gauge will reliably display the on-the-ground axle group weight in pounds or kilograms. When properly calibrated and used, Right Weigh's on-board load scales are the most valuable tools available for maintaining safe and legal axle weights.
Corresponding Installation Kits
(NOT INCLUDED)
:
101-SK
Covers the installation from the back of the load scale to an axle group’s air suspension system
301-QDK
Provides the quick disconnect and air line needed when connecting a truck-mounted gauge to a trailer axle group
Use a combination of these kits depending on where your height control valves are.  For example, if you have a dual HCV drive, and single HCV trailer, purchase 2 x
101-SK
and 1 x
301-QDK
T
ouchscreen LCD display
On-the-ground axle group weight is displayed in pounds or kilograms
Utilizes a simple two-point empty & loaded) calibration process which makes it more accurate than a standard analog gauge
Can calculate an estimated steer axle weight from drive axle suspension data
Programmable 6-digit PIN code can be activated to protect from calibration tampering
Black bezel with removable chrome styling cover