Insulation Thermostatic Incubator Heater PTC Ceramic Air Heater Heating Element

Description

Insulation Thermostatic Incubator Heater PTC Ceramic Air Heater Heating Element Incubator Parts 120*50mm 200W 24V
Description:
Rated Power:200W
Rated Voltage:24V
Size:120*50*26mm
heat material: PTC Thermistor
heat methods: heat radiation by airflow
lead wire: silicone high-temperature line
the length of lead wires: 200mm
the length of bare wires: 10mm
main used in Electric Heater /Air conditioning units/equipment//Humidifier/Air Purifier/
Advantage:
Safety, surface insulation.
Heat up quickly, long service life.
self-control temperature
small sound
Specifications:
1, the power line does not distinguish between positive and negative, you can freely link power 24V.
2, when the heater is dry, low thermal efficiency, it is recommended to use it with the fan.
3, can be placed under a wet environment, but can not be placed in water.
4, for the first time, will produce a small amount of smoke, which is a normal phenomenon, it will disappear within a short time.
5, built-in 230 degrees Celsius heater chip, when dry the surface temperature of about 200 degrees Celsius, the fan blowing, the surface temperature of about 120 degrees Celsius.
6, both ends of the product wearing bracket (PA66 high-temperature nylon)
7. Test: Ambient temperature 24 degrees Celsius, the wind speed: 3.3 m / s, distance from the outlet 10 cm. The hot air temperature of about 50-60 degrees Celsius.
8, under normal circumstances, the PTC heater in a very short time after the start, will have an impact power, which is about 1.5 to 3 times the rated power, but will rapidly decline, which is normal. Please buyers understand!
9, Life: about: 3--5 years.